Kelowna Railing Solutions Ltd. supplies and installs standoff railings for commercial and multi-family buildings throughout Kelowna. Side-mounted glass panels can create an open architectural appearance along stairs, balconies and mezzanines. However, every assembly needs approved glass, fitting and anchorage details appropriate to the building.
Fascia-mounted glass guards can preserve usable stair width while maintaining a clean edge profile. In addition, the design team must confirm stair geometry, handrail requirements and supporting structure.
Standoff glass guards can complement condominium balconies and shared terraces. Therefore, project teams should coordinate exterior exposure, waterproofing and approved structural connections early.
Commercial mezzanines may use point-fixed glass guards where approved by the design team. Moreover, the system must suit the required loads and occupancy conditions.
Custom panel geometry and hardware placement can accommodate selected curved or irregular layouts. Nevertheless, fabrication should follow verified site measurements and approved shop drawings.
We coordinate field measurements, panel specifications and hardware placement with the project team. Consequently, discrepancies can be resolved before glass fabrication.
01
Careful layout helps align glass joints and visible standoff caps. We also verify substrate locations and finished dimensions before installation.
02
Installation planning includes safe glass handling and protection of adjacent finishes. Furthermore, the general contractor coordinates access and sequencing with other trades.
03
British Columbia building requirements govern guard configurations and design loads. Accordingly, qualified professionals must approve the selected system and its structural connections.
04
Architectural finish choices can complement building elevations and interior common areas. However, all options must remain compatible with the approved assembly.
Our Kelowna team checks measurements and installation details against project documents. In addition, proposed changes are referred for review before work proceeds.
Visible finish checks, panel alignment and specified fitting inspections support consistent handover. Therefore, damaged glass or incompatible components should be addressed before completion.
Guard compliance depends on approved glass specifications, anchors and supporting substrates. Consequently, a hardware style alone cannot establish code compliance.
Standoff finishes and glass options can support contemporary architectural designs. We also consider access for future inspection and replacement.
Stainless steel fitting grades and finishes should reflect exposure and the project specification. Moreover, compatible gaskets and fasteners must suit the selected system.
Safety glass type, thickness and any required lamination depend on the approved design. Therefore, panel drilling and edge treatment must match fabrication documents.
Standoff anchors transfer loads into the building structure. Accordingly, crews verify attachment conditions and follow approved connection details.
Coordinated installation helps avoid conflicts with cladding, waterproofing and finished stair surfaces. In addition, planned glass deliveries reduce unnecessary site handling.
A standoff assembly uses point-fixed fittings to connect specified glass panels to a structural substrate. Nevertheless, its performance depends on the complete approved system.
Installers review substrates, position approved fittings and place fabricated glass panels. Then, they inspect alignment and specified hardware conditions.
The responsible design professionals confirm applicable BC guard requirements and structural performance. Consequently, field changes must receive appropriate review.
Side mounting can preserve usable space on selected stairs and terraces. However, designers must account for clearance and access requirements.
Point-fixed glass systems can create a light, modern visual profile. In addition, consistent fitting locations support an orderly appearance across repeated units.
Specified stainless steel hardware can offer durable exterior performance. Nevertheless, owners should inspect and maintain exposed fittings as recommended.
General clarity cleaning
Monthly
Use a soft squeegee and a mixture of water and vinegar or a non-abrasive glass cleaner.
Hardware wipe-down
Every 6 Months
Use a stainless steel cleaner and a soft cloth to remove fingerprints and environmental dust.
Tension and stability check
Annually
Visually inspect the connection between the standoff base and the fascia for any signs of movement.
Condition and fit check
Every 2 Years
Examine the plastic or rubber gaskets that prevent metal-to-glass contact; ensure they remain intact.
Substrate inspection
Every 12 Months
Check the mounting surface (wood/concrete) for any signs of cracking or moisture ingress near the anchors.
Our railing installations comply with the NBC to ensure structural integrit and occupant safety.
We follow CSA A440.4 standards for the design and installation of glass railing systems.
Our toughened safety glass meets CSA Z97.1 standards and shatters into small, rounded pieces for safety.
We adhere to NAFS (North American Fenestration Standard) for proper sealing, preventing water infiltration and increasing durability.
We use powder-coated finishes and marine-grade stainless steel for superior corrosion resistance and long-lasting performance in Canada's harsh climates.
Every installation we perform is in full compliance with Canadian safety codes, providing peace of mind to homeowners, builders, and property managers.
